Garrett Ace 250 Vs 350 – Which Is The Best?

We are always looking for quality metal detectors that come in handy when the need arises. If you are on the same quest, this article is for you. Today, we will be comparing two quality product models to seek out the ones that suit your needs best.

The frequency at which both the Garrett ACE 250 and the Garrett ACE 350 operate is the main distinction between them. It enables the Garrett ACE 350 to locate gold targets. That clarifies why the ACE 350’s display has a wider gold area than the ACE 250s.

Features to consider

1. Depth indicator

Metal detectors with a depth indicator are uncommon. This function, on the other hand, is really useful. It will tell you how far you’ll have to dig to get your object out of the dirt. Normally, depth indications will show you on the LCD screen how deep the object is, with a range of one to twelve inches.

2. Type of radar:

While many metal detectors have a ground-penetrating radar, the quality of the radar varies. Nevertheless, the quality of the radar systems has a significant impact on the overall cost of the gadget, so expect to pay top cash for your metal detector if you want high-end equipment.

Note: Most radars can properly measure the density and size of the hidden object, so if this is a problem for you, look for a detector with a high-quality radar.

3. Sensitivity meter: 

A metal detector’s sensitivity feature is utilized for two purposes: first, to find objects of various sizes. You’ll be able to find tiny metal items if the sensitivity is set too high; you’ll be able to find larger items if it’s set too low.

4. Coil:

This is the flat sphere you hold above the ground at the end of the detector. It is available in a variety of forms and shapes, including double-D, concentric, and spider motifs. Every sort of coil is better at some things and worse at others, so think about what you’ll be using your detector for before picking one.

5. Pinpointing

A few metal detectors have a pinpoint mode option. It’s utilized to assist you to zero in on the object you’re looking for. Even though all detectors offer you a general sense of where to look for an object, the pinpoint mode allows you to identify its exact location.

The sensor is located in the center of the coil, and the mode button is generally located up by the hand. Push the pinpoint button once you’ve determined there’s an object nearby, and you should be able to pinpoint its exact location.

Major differences: Garrett ace 250 vs 350

As mentioned earlier, the new 11 inches DD PRO-formance coil that comes stock on the Ace 350 is perhaps the most visible difference between the Garrett Ace 250 and the Garrett Ace 350 metal detectors.

First of all…

Increased target separation and improved ground mineralization management are two of the conventional advantages of DD coils. The new Ace 350 coil appears to increase stability in mineralized soils, but just a little. The Ace 350 has a minor depth advantage over the Ace 250.

Keynote

This is understandable given the greater cost of metal detectors that can handle considerable mineralization. The depth rise is more visible under gentle soil conditions, however, target depths are given extra attention.

Another of the reasons I tried the Ace 350 was to see how the two metal detectors compared in terms of signal response and target separation. For newbie detectorists, I appreciate the Ace 250’s ease of use and feature set.

Notable Ace 250 drawback:

When passing over a metal target, the signal response is a little delayed. After the coil has passed the target, the audio response begins. For first-time users of this metal detector, this can make pinpointing without using the pinpoint feature more difficult than it should be. Unfortunately, the Ace 350 is affected by the same response time delay.

In terms of target separation, I’ve observed a significant improvement. However, the narrow hot strip of a DD coil’s thin hot strip is limited by the delayed target reaction. Furthermore, when evaluating a DD coil to a concentric coil, the target id appears to be a little jumpier.

The operating frequency is another difference between Ace 250 and Ace 350. The Ace 350 operates at 8.25 kHz rather than 6.5 kHz, which should make it more responsive to low-conductive targets such as foil, nickels, gold, and pull tabs.

Keynote

Practically, the frequency is still too low to make any bold statements about the Ace 350’s superiority in small gold prospecting. And besides, it is a multi-purpose metal detector for beginners. Both metal detectors have a target id cursor with 12 segments.

In comparison to the Ace 250, the Ace 350 has four iron discrimination segments rather than two. Relic hunters who are looking for some, but not all, iron targets could find this useful.

Editors opinion:

Therefore, how does the Ace 350 stack up against the Ace 250? Ultimately, the Garrett Ace 350 outperforms the Ace 250, but are the minor advantages worth the extra money? It’s a very personal decision, but I do not believe the Ace 350 provides a significant enough boost to justify the additional premium. The Garrett Ace 250 is a better value for money for an entry-level metal detector with a digital display and several search features.

Buy Garrett Ace 250

Conclusion

Treasure seekers are aware that coins, artifacts, and gold can be found in a variety of locations. In the sand, several inches underground, in the water, or among trash. Whether you find that treasure or pass it up depends entirely on the model of metal detector you’re using.

I put these two metal detectors through several rigorous tests and discovered that, in comparison to other devices in the category, they are extremely trustworthy. Not only did this model win all five of our tests, but it also has a vivid LCD screen with a variety of functions and settings.